? epcos ag 2007. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw rx filter gsm850 / wcdma band v series/type: ordering code: B9432 b39881B9432m410 date: version: may 11, 2007 2.3
2 may 11, 2007 B9432 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet application n low-loss rf filter for mobile telephone gsm850/wcdma band v systems, receive path (rx) n useable passband 25 mhz n unbalanced to balanced operation n impedance transformation from 50 w to 100 w n suitable to gprs class 1 to 12 features n package size 1.4 x1.1 x 0.4 mm 3 n package code qcs5i n rohs compatible n approximate weight 0.003 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) 0,325 bottom view side view top view 0,575 1 5 4 3 2 0,25 1,1 1,4 0,5 0,5 0,4 +/?0,05 pin configuration n 1 input unbalanced n 3,4 output balanced n 2,5 to be grounded
3 may 11, 2007 B9432 881.5 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 100 w B9432 min. typ. @ 25 ?c max. center frequency f c 881.5 mhz maximum insertion attenuation a max 869.0 ... 894.0 mhz 1.8 2.5 db amplitude ripple (p-p) da 869.0 ... 894.0 mhz 0.7 1.3 db amplitude ripple at 5 mhz bw da 869.0 ... 894.0 mhz 0.5 0.9 db group delay variation at 5 mhz bw 869.0 ... 894.0 mhz 18 30 ns error vector magnitude 1) @f carrier 1) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 871.4 ... 891.6 mhz 1.8 2.5 % input return loss 869.0 ... 894.0 mhz 10 14 db output return loss 869.0 ... 894.0 mhz 10 14 db output amplitude balance (|s 31 /s 21 |) 869.0 ... 894.0 mhz C0.8 C0.4/0.2 0.8 db output phase balance ( f (s 31 ) C f (s 21 )+180?) 869.0 ... 894.0 mhz C8 -5/+5 8 ? attenuation a dc ... 840.0 mhz 47 51 db 840.0 ... 849.0 mhz 40 50 db 914.0 ... 950.0 mhz 24 28 db 950.0 ... 1150.0 mhz 45 50 db 1150.0 ... 1250.0 mhz 40 47 db 1250.0 ... 3000.0 mhz 45 50 db 3000.0 ... 6000.0 mhz 40 58 db
4 may 11, 2007 B9432 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet maximum ratings operable temperature range t C30/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 100 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at gsm850, gsm900 p in 15 dbm effective power in the on-state gsm1800, gsm1900 p in 15 dbm duty cycle 4:8 tx bands
5 may 11, 2007 B9432 881.5 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
6 may 11, 2007 B9432 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet s11 s22
7 may 11, 2007 B9432 881.5 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. references type B9432 ordering code b39881B9432m410 marking and package c61157-a8-a3 packaging f61074-v8212-z000 date codes l_1126 s-parameters B9432_nb.s3p B9432_wb.s3p soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2006. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
8 may 11, 2007 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of passive electronic compo- nents or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer appli- cations in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic compo- nent. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, ceradiode, cssp, phasecap, phasemod, sifi, sikorel, silver- cap, simid, siov, sip5d, sip5k, topcap, ultracap, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
